Announcement

Collapse
No announcement yet.

C1 - Firmware - current version and changes.

Collapse
This topic is closed.
X
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • C1E_01472 is published.

    Button 1.. Button 3 presets can be now directly exported once the presets are saved from at least this FW on.
    Therefore is recommended to load and save each Button 1.. Button 3 after this update.
    1. Mecha it possible.
    2. Mecha it easy.

    MECHA Support mecha(at)nodalninja.com

    Comment


    • C1E_01473 is published

      The "label" of a preset becomes "name" from now on.
      Added [Rename] button in UI for renaming a preset.
      To rename a preset, select first the preset then click/tap on [Rename]

      Added support for exporting all presets in one file.
      To export all presets in one file, select the 'Presets' from presets list,
      then click/tap on [Export]
      All presets will be exported in 'all_presets.mps' file.
      If you rename that file let the name starts with "all_presets" if you want to import the presets back in (other) MECHA.
      To import the presets exported, click/tap on [Import] then browse to 'all_presets(..).mps' file and confirm, depending on browser used.
      The UI will re-load automatically and the imported presets will have "(i)" next to name in presets list.
      Is recommended to rename the imported preset with their name or other name to remove the (i)
      before the next [Import] procedure, otherwise duplicates in list can occur if the same presets are included in file and imported again, and can be more difficult to deal with later.

      After you renamed or saved the imported presets,
      in order to delete all unneeded "(i)" presets you can select one such preset then delete it and confirm to delete all "(i)" presets.
      1. Mecha it possible.
      2. Mecha it easy.

      MECHA Support mecha(at)nodalninja.com

      Comment


      • C1E_01474 is published

        Added in /config page
        [x] Switch the Left - Right rotation when done by MECHA buttons.
        If the option is not ticked (default) the rotation sense matches the rotation from UI, as before.
        This affects only the adjustments of the orientation using [<] and [>] buttons of MECHA.
        It has no effect on codes, power codes nor on button presets.

        Added support for "Bulb" mode on for cameras with this feature:
        If modifier starts with "B",
        like B2EV or B-2EV or B1 or
        or B1,0.03,0.06,0.13,0.25,0.50,2,4,8,16,32
        or My AEB;B1,0.03,0.06,0.13,0.25,0.50,2,4,8,16,32
        MECHA will assume "bulb" mode and the time shutter is closed is the one computed, or entered.
        If there is not "B" MECHA will assume "regular trigger" mode and the minimum time shutter is closed
        is 0.25 sec. just like the way one will press on camera's button.
        1. Mecha it possible.
        2. Mecha it easy.

        MECHA Support mecha(at)nodalninja.com

        Comment


        • C1E_01475 is published.

          Happy New Year 2o2o !

          Added support for backup and restore of all data in MECHA.
          In /config page there is [Backup Data] which will export all data from MECHA to 'backup.mbk' file.
          The file is safe to be sent for support and debug purpose or for data to be cloned on other MECHA
          It not contain any other Wi-Fi data, except the SSID name/password of the MECHA itself.

          Although is working, the button for restore from the backup file is not visible yet,
          until the backup and restore procedures are more tested.
          It is recommended, however, to backup data ASAP, just in case is needed for restore at some point.
          [Save Data] button becomes now [Apply] as is more suited for applying the changes made in /config
          1. Mecha it possible.
          2. Mecha it easy.

          MECHA Support mecha(at)nodalninja.com

          Comment


          • C1E_01476 is published.

            Button 1.. Button 3 presets can be now directly exported even if the presets were saved from older than C1E_01472.
            MECHA will automatically convert then export them properly.
            1. Mecha it possible.
            2. Mecha it easy.

            MECHA Support mecha(at)nodalninja.com

            Comment


            • C1E_01478 is published.

              [[Restore Data] button is now visible in /config
              To restore a previously saved backup
              Click/tap on [Restore Data] then browse to 'backup(..).mbk' file and confirm, depending on browser used,
              then [OK] and wait for UI to re-load.
              Make the changes in /config, if needed, then [Apply] then power cycle MECHA.
              1. Mecha it possible.
              2. Mecha it easy.

              MECHA Support mecha(at)nodalninja.com

              Comment


              • C1E_01479 is published

                Optimizations in communications between MCUs
                1. Mecha it possible.
                2. Mecha it easy.

                MECHA Support mecha(at)nodalninja.com

                Comment


                • C1E_01480 is published.

                  Addressed an issue regarding Status Feedback in UI display positive angles in both direction if a button preset was launched using the MECHA buttons.
                  1. Mecha it possible.
                  2. Mecha it easy.

                  MECHA Support mecha(at)nodalninja.com

                  Comment


                  • C1E_01481 is published

                    Added in /config MCU i2c Speed: Standard=default, Fast, Turbo.
                    There is no reason to be changed, ATM.
                    1. Mecha it possible.
                    2. Mecha it easy.

                    MECHA Support mecha(at)nodalninja.com

                    Comment


                    • More about zLM here
                      https://forum.nodalninja.com/forum/p...-zlm#post30876

                      C1E_01482 is published.

                      Introducing Zero Learning MECHA (aka zLM) mode for use of MECHA.
                      This allows the use of MECHA without need of use of interface (UI), just pressing one button and another for direction (the sense of rotation)
                      The only requirement is for MECHA to be connected to internet when you test if that is what you want.
                      Is no need to be connected to Wi-Fi nor Internet when you actually use it, only first time after a change in what you want is made, i.e. only when testing.
                      1. Mecha it possible.
                      2. Mecha it easy.

                      MECHA Support mecha(at)nodalninja.com

                      Comment


                      • C1E_01483 is published

                        Addressed an issue regarding dual axis combo of two MECHAs, when if the pano is made to [LEFT] (counter clockwise) extra unneeded rotation of horizontal MECHA were made before Nadir and Zenith shots, but to [RIGHT] was OK.
                        1. Mecha it possible.
                        2. Mecha it easy.

                        MECHA Support mecha(at)nodalninja.com

                        Comment


                        • more about the NG FW here
                          https://forum.nodalninja.com/forum/p...2001#post30882

                          C1E_01484 is published

                          This FW update make the preparation for the next generation (NG) of FW which starts with C1E_02001
                          NG has a new memory footprint, in short, has twice as much storage space available
                          For this reason the NG will format the current MECHA storage.
                          To have all settings/presets preserved, MECHA will require to back-up data then restore it.
                          If that process is successfully done, the update to C1E_02001 can be performed and first time, after that update, when the UI is accessed the restore of the data needs to be done again.
                          That will result in MECHA with new generation of FW and all the old settings/presets preserved.
                          1. Mecha it possible.
                          2. Mecha it easy.

                          MECHA Support mecha(at)nodalninja.com

                          Comment


                          • more about NG FW here
                            https://forum.nodalninja.com/forum/p...2001#post30882

                            C1E_02001 is published

                            Congrats! This is the New Generation of FW running in MECHA
                            If some settings/presets look missing, please restore the data previously backed-up in C1E_014xx FW
                            1. Mecha it possible.
                            2. Mecha it easy.

                            MECHA Support mecha(at)nodalninja.com

                            Comment


                            • C1E_02002 is published

                              Better handling of backup and presets files if saved and load from different OS and browsers.
                              1. Mecha it possible.
                              2. Mecha it easy.

                              MECHA Support mecha(at)nodalninja.com

                              Comment


                              • C1E_02003 is published.

                                Added support for simple pulse protocol on AUX port, for some upcoming accessories connected at AUX port.
                                1. Mecha it possible.
                                2. Mecha it easy.

                                MECHA Support mecha(at)nodalninja.com

                                Comment

                                Working...
                                X