Announcement

Collapse
No announcement yet.

C1 - Firmware - current version and changes.

Collapse
This topic is closed.
X
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • C1E_02056 is published

    Optimizations in AP+STA mode.
    When MECHA is in AP+STA mode and the connection to SSID cannot be maintained or the SSID isn't available, it will automatically switch to AP only until reboot.
    The time of automatic scanning (LEDs lit animated up and down) of a needed and missing SSID is reduced to:
    10 seconds automatic at start.
    30 seconds before updating via codes.
    1 minute when connecting to a new SSID from UI.
    These times allows the starting an hot-spot, if needed.
    The scanning stops immediate when the SSID is found or the power button is pressed.

    Optimizations at FW update.
    When updating, MECHA will try silently to connect to the last SSID was connected to,
    in both AP and AP+STA mode, only if it fails it will ask for connection to an Internet enabled SSID to perform the update.
    1. Mecha it possible.
    2. Mecha it easy.
    3. Mecha team up.

    4. ..

    Comment


    • C1E_02057 is published

      Improvements in automatic pairing for MECHA DAC
      Added third method for pairing
      1) Start H MECHA and at -=-=-=-= press [1] 3 seconds (until multiple beeps are heard)
      2) Start V MECHA and at -=-=-=-= press [2] 3 seconds (until multiple beeps are heard)
      MECHAs will be automatic paired and will remain paired after power OFF then ON
      This procedure will create
      MECHA-H-DAC with password 12345678 and
      MECHA-V-DAC with password 12345678
      If in /config of H MECHA, the SSID name is changed and password is changed, if both MECHAs are ON and paired, the SSID and password will be changed in V MECHA as well as long as SSID starts with MECHA-H in the first one.
      So after the MECHAs are paired and the SSID and name is changed in config of H MECHA say, from
      MECHA-H-DAC to MECHA-H123 with password 87654321
      V MECHA will receive the name MECHA-V123 and same password 87654321

      As result of these, without using any method of pairing,
      a MECHA-V999 in STA mode will always try to pair with MECHA-H999 if its SSID is ON and both have the same password and only the H-V difference in SSID name.
      If MECHA V needs to be used unpaired, either press [1] short at -=-=-= or change the default mode to AP or change the name with different pattern

      This also opens the way to pair remotely two MECHAs via support, if needed, if they can access the Internet

      In Script text area, :: will be automatically replaced with = to allow more easy input from phones.
      Some other keyboard short-cuts will be added when needed.
      1. Mecha it possible.
      2. Mecha it easy.
      3. Mecha team up.

      4. ..

      Comment


      • C1E_02058 is published,

        Addressed an issue regarding V MECHA not being stopped by [STOP] or [CANCEL] or by power button from H MECHA if its movement was started by a script.
        1. Mecha it possible.
        2. Mecha it easy.
        3. Mecha team up.

        4. ..

        Comment


        • C1E_02059 is published

          MECHA DAC Improvements and increased stability for FW update both at once using code 3212312<
          This will be in effect at the next update from C1E_02059, of course.
          1. Mecha it possible.
          2. Mecha it easy.
          3. Mecha team up.

          4. ..

          Comment


          • C1E_02060 is published.

            MECHA DAC Improvements and increased stability for FW update both at once
            from MECHA H from UI or using the code 3212312<
            Provided the naming pattern starts with MECHA-H and MECHA-V and the units are paired, when updating MECHA H from UI or via 312312< 31212< codes, the update will assure both units to have the same FW regardless if one or the other were updated individually. The update time was reduced from 4 minutes to 2:40, it might vary, depending on internet connection.
            This will be in effect at the next update if both units have at least C1E_02060.
            1. Mecha it possible.
            2. Mecha it easy.
            3. Mecha team up.

            4. ..

            Comment


            • C1E_02061 is published.

              Addressed an issue regarding the [Cancel] command not working with DAC presets, sometimes.
              1. Mecha it possible.
              2. Mecha it easy.
              3. Mecha team up.

              4. ..

              Comment


              • C1E_02062 is published.

                Addressed an issue preventing entering to AP+STA via button [3] at start in the case of slow routers.
                Increased the maximum scanning time for an non existing Wi-Fi to 30 sec., needed in the case of slow routers for a successful establish of the connection in STA and AP+STA
                The scanning can be stopped via short press on power button.
                Addressed an issue which caused updates from old FW to require /delang to display labels properly, and display XXXXXX on some cases

                Added 1321 test Execute a test panorama for MECHA DAC to left or to right (12 shots around, 3 rows at 0,+- 45 deg. plus Zenith and Nadir. The code needs to be entered in H MECHA and the V MECHA needs to be raised i.e. oriented downward, like for the nadir photo.
                The first time please test the codes without camera mounted.
                The tests can be stopped by pressing the power button.
                1. Mecha it possible.
                2. Mecha it easy.
                3. Mecha team up.

                4. ..

                Comment


                • C1E_02063 is published.

                  Addressed an issue related to S-Language which made the Square pattern panorama examples from Server to not move as it should.
                  1. Mecha it possible.
                  2. Mecha it easy.
                  3. Mecha team up.

                  4. ..

                  Comment


                  • C1E_02064 is published

                    Addressed an issue related to Scripts starting with T or Z not having vertical movements sometimes.
                    1. Mecha it possible.
                    2. Mecha it easy.
                    3. Mecha team up.

                    4. ..

                    Comment


                    • C1E_02065 is published

                      Improved the S-Language regarding the loop.
                      Added a DAC Column Example on Server.
                      1. Mecha it possible.
                      2. Mecha it easy.
                      3. Mecha team up.

                      4. ..

                      Comment


                      • C1E_02066 is published

                        Improved the Automatic pairing, If MECHA SSID names starts with MECHA-H and MECHA-V and both are connected to the same network, like a phone hot-spot, they will automatically pair at start.
                        The LEDs will lit - on MECHA-H and = on MECHA-V accordingly.
                        1. Mecha it possible.
                        2. Mecha it easy.
                        3. Mecha team up.

                        4. ..

                        Comment


                        • C1E_02067 is published

                          Added 232< code to disable or enable the LEDs, useful during night photography.
                          The LEDs will light however if buttons are pressed for entering a code, to show the result of a code or for battery check.
                          Enhanced the performance of MECHA DAC by using less RAM for communication.
                          1. Mecha it possible.
                          2. Mecha it easy.
                          3. Mecha team up.

                          4. ..

                          Comment


                          • C1E_02068 is published

                            MECHA DAC Added in /config Pairing PIN [1234] which is optional if you have more than 2 MECHAs connected to the same network or to same hot-spot and want to be automatically paired at start.
                            The MECHAs which have the same PIN will be paired together.
                            All the pairing methods and previous requirements are still valid.
                            Once paired, if the PIN is changed in H MECHA will automatically set the same in V MECHA
                            If want to break the pairing, please set a different PIN in V MECHA
                            1. Mecha it possible.
                            2. Mecha it easy.
                            3. Mecha team up.

                            4. ..

                            Comment


                            • C1E_02069 is published

                              Improved the performance in checking for allowed automatic pairing if Pairing PIN is used.
                              1. Mecha it possible.
                              2. Mecha it easy.
                              3. Mecha team up.

                              4. ..

                              Comment


                              • C1E_02070 is published

                                If paused, MECHA can be resumed by pressing button [>] as well as from UI by click/tap on [Pause]
                                1. Mecha it possible.
                                2. Mecha it easy.
                                3. Mecha team up.

                                4. ..

                                Comment

                                Working...
                                X