Announcement

Collapse
No announcement yet.

C1 - Firmware - current version and changes.

Collapse
This topic is closed.
X
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • There is a problem at update server, will be fixed ASAP
    1. Mecha it possible.
    2. Mecha it easy.
    3. Mecha team up.

    4. ..

    Comment


    • Fixed, it is all good now.
      1. Mecha it possible.
      2. Mecha it easy.
      3. Mecha team up.

      4. ..

      Comment


      • C1E_02208 is published

        Added /connect page in UI, it allows connection of MECHA to a wireless network in an easier way, by listing the available networks.
        The network which has connected successfully last time will be on gray background, that one can be connected by using the stored password instead of typing it.
        This page will be enhanced in future FW updates ( e.g. [Update] button will be added soon)

        In UI [IMG] is changed in [TRG] - from trigger - to be more precise what MECHA does and how the number of resulting images could differ from triggers when in camera bracketing is used.
        MF will send now also the AF signal required for Sony cameras, if is need for no AF signal at all, please select the newly added AF OFF, in AF selection, in UI.
        1. Mecha it possible.
        2. Mecha it easy.
        3. Mecha team up.

        4. ..

        Comment


        • C1E_02210 is published

          This is Beta.
          Introducing support for stitchless panoramas and tours for Fanotec products.
          More upcoming info at the link below
          https://forum.nodalninja.com/forum/p...tics/33391-stc
          1. Mecha it possible.
          2. Mecha it easy.
          3. Mecha team up.

          4. ..

          Comment


          • C1E_02211 is published

            STC, addressed an issue causing the initial opening view to not work if was a positive value e.g. h[1]=6; but worked fine for negative values e.g. h[1]=-6;
            1. Mecha it possible.
            2. Mecha it easy.
            3. Mecha team up.

            4. ..

            Comment


            • C1E_02212 is published

              Addressed an issue regarding the [Shoot] button on NN IR remote and on C2 controller, were not triggering the camera after an emergency stop or when in/after pause from script or if paused by IR remote.
              1. Mecha it possible.
              2. Mecha it easy.
              3. Mecha team up.

              4. ..

              Comment


              • C1E_02218 is published
                Please use this thread for feeback
                https://forum.nodalninja.com/forum/p...r-confirmation

                This is beta: Added in /config "[x] Enable Fast Shutter Confirmation."
                If is enabled, MECHA will wait indefinitely, for each trigger, until the shutter confirmation comes through AUX port via a PC Sync cable.
                For now, in case of DAC, this should be enabled in /config of the controller the AUX port has the PC Sync cable connected to.
                This should help when the shutter open time is not known, like AEB.
                Please test it and send feedback via forum or e-mail support.
                Is an extension of the old shutter confirmation, which, reportedly, didn't work well for very short exposure times.
                1. Mecha it possible.
                2. Mecha it easy.
                3. Mecha team up.

                4. ..

                Comment


                • C1E_02220 is published

                  Added support for automatic detection of Rotator Type
                  If Rotator Type is detected by MECHA to be different from the one set in /config,
                  it will use the parameters for the detected one instead.
                  1. Mecha it possible.
                  2. Mecha it easy.
                  3. Mecha team up.

                  4. ..

                  Comment


                  • C1E_02221 is published

                    The Automatic Detection of Rotator Type is retrograded as beta, and will detect only if the rotator type is set on "AUTO"
                    until we're sure all the rotators out there presents properly.
                    1. Mecha it possible.
                    2. Mecha it easy.
                    3. Mecha team up.

                    4. ..

                    Comment


                    • C1E_02222 is published

                      Addressed an issue regarding auto detection of some rotators
                      C2 - Addressed issues regarding swapping of cables being not fully propagated in various procedures.
                      1. Mecha it possible.
                      2. Mecha it easy.
                      3. Mecha team up.

                      4. ..

                      Comment


                      • C1E_02223 is published

                        Addressed an issue regarding A: delay in MSS with single position on row like 0x1, 60x1 and in other situations when an extra A: delay was produced for simple movements with no shots.

                        Shutter Confirmation, added an entry on E: delay list,
                        "E:SHT C."
                        and only when this entry is selected the shutter confirmation will be used, either regular or Fast (beta)

                        If Fast Shutter confirmation is enabled, the PC Sync cable needs to be inserted before powering MECHA ON, or before [Apply] in /config.
                        MECHA will detect if the PC Sync cable is present and use Fast Shutter Confirmation only if is present, therefore if a wired remote is used to emulate shutter confirmation, please press full and hold its button when clicking on [Apply] then release it after 2 seconds or more.
                        1. Mecha it possible.
                        2. Mecha it easy.
                        3. Mecha team up.

                        4. ..

                        Comment


                        • C1E_02225 is published

                          Some small changes in the beep routine, MECHA may sound a bit different, this is normal.

                          Fast Shutter Confirmation (FSC), if enabled, will work with IR remote, provided the correct adapter is used to have both IR receiver and PC Sync Cable connected to AUX port.

                          For MECHA DAC only: As FSC is still beta, please use in MECHA-DAC-H AUX port if in MECHA-DAC-V doesn't work.
                          1. Mecha it possible.
                          2. Mecha it easy.
                          3. Mecha team up.

                          4. ..

                          Comment


                          • C1E_02226 is published

                            Fast Shutter Confirmation (FSC):
                            Added [E: SHT C1] delay in UI, it works the same as [E: SHT C.] but MECHA sends only One Signal to Camera and waits for TRG confirmations, this is useful when you have camera set for bracketing to press one time on button and camera takes automatically the whole bracketing set.
                            For DAC, and for now, this will work on MECHA-H-DAC only.
                            1. Mecha it possible.
                            2. Mecha it easy.
                            3. Mecha team up.

                            4. ..

                            Comment


                            • C1E_02227 is published

                              Addressed an issue regarding presets saved on buttons, if loaded and saved again, the script was not accessible for edit in UI.
                              1. Mecha it possible.
                              2. Mecha it easy.
                              3. Mecha team up.

                              4. ..

                              Comment


                              • C1E_02228 is published

                                Added Button confirmation option for E: delay.
                                [ E: BTN > C. ] MECHA will wait, after any trigger, the confirmation with button [>] of Controller or NN IR Remote to continue.
                                [ E: BTN > CT ] MECHA will wait only TRG confirmations with button [>], then will use the learned delay(s) to finish the preset.
                                An option to have the learned delays persistent for later use will be added soon.
                                1. Mecha it possible.
                                2. Mecha it easy.
                                3. Mecha team up.

                                4. ..

                                Comment

                                Working...
                                X