C1 - Firmware - current version and changes.

[DorinDXN]

C1E_02300 is published.

Added in /config Shutter Confirmation Time Out (sec.) : 30, which is the maximum time MECHA waits for the shutter confirmation to occur.

[DorinDXN]

C1E_02301 is published

Addressed an issue regarding SHT C or SHT C1, if set, failed to trigger the Shutter signal after a cold start of MECHA.

[DorinDXN]

C1E_02302 is published

Addressed an issue regarding BTN > CT causing MECHA to freeze sometimes.

[DorinDXN]

C1E_02303 is published

Added in /config
[ ] Use Two IR Receivers (DAC ONLY).
disabled by default, which allows the use of two IR receivers, one in each MECHA.
if this is enabled in H MECHA the setting will be passed automatically to V MECHA.
The [ ] Use of NN IR should not be enabled in V MECHA, but only in H MECHA for two IR receivers to work.

[DorinDXN]

C1E_02304 is published

MECHA DAC. Addressed an issue regarding emergency stop from IR on V MECHA when two IR receivers are used.

[DorinDXN]

From now on, the daily FW updates, if any, will be only for addressing the issue surfaced, in order to provide better experience ASAP, with less trouble.
The new features will be released in monthly updates, thus providing enough time to be tested before publishing.

C1E_02305 is published.

MECHA DAC. Addressed an issue regarding emergency stop from IR on V MECHA.
MECHA DAC. Addressed an issue regarding interval buttons for V MECHA, if commanded from IR, resulted, sometimes, in reverting back to the initial position.

[DorinDXN]

C1E_02306 is published

MECHA DAC. Increased the emergency stop response from IR for H MECHA.

[DorinDXN]

C1E_02307 is published

Addressed an issue regarding IR commanded moves become interrupted at continuous press of IR left-right buttons.

[DorinDXN]

C1E_02308 is published

The wait for shutter confirmation can be terminate now from Web UI by both [STOP] and [Cancel]

[DorinDXN]

C1E_02309 is published

Added in /config
[x] Hide some controls in web UI when a motor is running.
Enabled by default.

[DorinDXN]

C1E_02311 is published

Small optimizations.

[DorinDXN]

C1E_02312 is published

Addressed an issue regarding STEP by STEP mode sometimes remains ON after the preset is ended, instead of becoming OFF.

[DorinDXN]

C1E_02313 is published

Addressed an issue regarding gesture mode, MECHA was turning back to initial position after rotation.

[DorinDXN]

C1E_02314 is published

Addressed an issue regarding comments on M: modifier and Script, the separator is now changed from ; to ~
E.g.
My AEB~B1,0.03,0.06,0.13,0.25,0.50,2,4,8,16,32
My Script~SL,0x10,-44.36x10,44.36x10,Z,NN

[DorinDXN]

C1E_02315 is published

Removed AF OFF to avoid confusion with MF
For particular applications if is need to have no AF signal at all, nor MF, is possible to use AF 0 sec.