C1 - Firmware - current version and changes.

[DorinDXN]

C1E_02357 is published

Enhanced the import pattern from .pts, .pto and .xml files to use a more compact form of MSS with Pitch and Yaw conventions.

[DorinDXN]

C1E_02358 is published

Enhanced the generated pattern when U-L and D-R corners are given.
Addressed an issue regarding the reload of a preset in web UI if modified in OLED, while the "Reloading.." was shown the preset wasn't eventually reloaded.

[DorinDXN]

C1E_02359 is published

If the imported pattern from .pts, .pto and .xml files contains up to 3 positions, those positions will be considered to define a partial panorama.
More enhancement in this area will come in the next FW update

[DorinDXN]

This is a huge update,
if it looks intimidating, you can wait a bit for the documentations and videos to be produced,
we're working around the clock to have them available ASAP


C1E_02360 is published

The Turn page in web UI is suspended, any calls to it will be re-directed to Row instead, a newer Turn page will be added later.

A new Two-Axis slider is replacing the old one, the new Slider may not work on old phones or browsers. In such a case, please contact support for feedback and future solutions.
The new Slider has also corner limits, which are by default (-180° yaw 90° pitch) and (180° yaw -90° pitch), respectively.
The corners and current position can be set with rough, fine or 1 degree precision: [10], [5], [1]. The precision is controlled by a button at the top of the slider. The +/[-] button show the slider in either expanded or collapsed form.
Setting and adjusting the corners will produce the script for the corresponding partial panorama determined by the corners, the corners means limit positions in the partial panorama, e.g. a [pitch 60, yaw -90] and [pitch -50, yaw 100] will mean these two positions and any in between will be included in the resulting panorama.
Under the script area, there are now some new selection lists that control how the script is generated and affect the script as well. Please note that any manual edit in the script will be lost when the values in the lists are changed.
The list includes:
Script format [p y, TxN], pitch and yaw or Tilt x Numbers, [SL, SP, SR] start positions, [< ? >] rotation senses, [MDU, DMU..] row order, as well as Zenith and Nadir terminations, [Normal, ZigZag], [Sphere, Grid], [Portrait, Landscape], [OV: %] vertical overlap, [OH: %] horizontal overlap, and [FF, 1.5x, 1.6x, 2.0x, 2.7x] crop factors.
Added [SET] [GO], [P], [L], and [R] buttons to tell MECHA in which position it currently is. This will became automatic in a future FW update. For now, e.g., you can adjust the position by either use the controller's buttons or slider to level position, then with first button as [SET] click on [L] to set MECHA as level, then you can use change [SET] to [GO] then click on[P] or [R] to change the positions to Parked or Raised.
The script must match the position (this will be automatic in a next firmware).
There are [1], [2], [3] buttons as well which can be either set with the current slider position or go to the set position
Videos and documentations will follow soon.

[DorinDXN]

C1E_02361 is published

Extended the crop factor list to include the medium format and point-and-shoot cameras, added also custom value in web UI.
The pause which can be inserted in generated script can have now a number, which will represent the number of seconds after which, if no action is taken by user, MECHA will advance.
e.g. 1 sec. pause before 1st row, 2 s. before 2nd, 3 s. before 3rd, 4 s. before Zenith and 5s. before Nadir.
in [TxN] format
SL,1p0x12,2p-45x12,3p45x12,4pZ,5pN
if the script is in [p y] format, ":" needs to be used instead of "p",
SL 1:p0 y0 30..330 2:p-45 y0 30..330 3:p45 y0 30..330 4:p90 y0 5:p-90 y0 RT

[DorinDXN]

C1E_02362 is published

Addressed an issue regarding the slider was not aware if the rotator type was changed during a session.

[DorinDXN]

C1E_02363 is published

Added a "moving.." text to be shown when slider commands MECHA to move
The slider will use the current settings for speed, micro-stepping and profile for motor commands.
in RAW interface there added &sim parameter, if is passed in commands MECHA will not move the motors, instead only will simulate and return the values.
the &pr &sp and &ms can have number or not, without number they will specify all the rotators in MECHA
e.g. &ms1=32 will specify the micro-stepping for rotator 1 while &ms=32 will do for both rotators.

[DorinDXN]

C1E_02364 is published

Optimized the design of the slider for better visibility and responsiveness.
In the combined button under the Slider, added [Corner 1] and [Corner 2] for SET the current position as corner or GO to corner.

[DorinDXN]

C1E_02365 is published

Addressed an issue regarding the corners in slider in some cases when old rotators E1 were used.

[DorinDXN]

C1E_02366 is published

Addressed an issue regarding the Slider in collapsed form failed to rotate the motors.

[DorinDXN]

C1E_02367 is published

Addressed an issue regarding the Slider reflected the end position wrong as Level instead of Raised or Parked, if the preset was started in Raised or Parked.

[DorinDXN]

C1E_02370 is published

Addressed an issue regarding the Slider in collapsed form got stuck.

[DorinDXN]

C1E_02371 is published

Addressed an issue regarding up and down limits in partial panorama, when one of them was 0, MECHA ignored that limit.

The IR Remote test will automatically enable the use of the NN IR Remote if is not enabled, without need to access /config anymore.

[DorinDXN]

C1E_02372 is published

Addressed an issue regarding button [3] on NN IR Remote has shown the code IR 4 instead of IR 31 when executing the IR Test.

[DorinDXN]

C1E_02373 is published

Addressed an issue regarding the Slider wasn't initialized if "[x] Use cache for UI translation" was enabled in /config