C1 - Firmware - current version and changes.

[DorinDXN]

C1E_02327 is published

Addressed some issue regarding ^ in MSS language,
e.g. SL,0x1^360,-45x1^360,45x1^360
produced another 360 turn on -45 and 45 instead of only one requested.
For simulation purposes or for situations when MECHA should not close any signal on shutter cable, negative TRG can be used which will be the same as positive TRG except no Focus nor Shutter signal are closed.

[DorinDXN]

C1E_02326 is published

Addressed some issue regarding AF 0.1 and MF

[DorinDXN]

C1E_02325 is published

For presets created with parameters, MECHA will differentiate e.g. "1" from "01" for the "b" parameter,
the first will assign preset for button [1], while the later will produce a preset with the power code 01.

[DorinDXN]

C1E_02324 is published

For presets created with parameters, "b" can be now greater than 3, in which case will become a power-code, e.g. 192.168.8.1/preset?b=123&s=12&t=3&e=0.5&p=2
0123 MECHAuto_12 will be created, and can be launched by
[power] wait 1s [1][2][3][>]
or
[power] wait 1s [1][2][3][<]
sequences.
Note1: for "b" greater than 3, the preset will not overwrite any existing preset, instead a new preset will be added, you can delete the old one in /row page.
Note2: if multiple presets have the same power code the launch sequence will consider only the first one (the oldest) added.

[DorinDXN]

C1E_02323 is published

Added parameter "e" available for presets created with parameters, it sets the E: delay or Exposure,
e.g. 192.168.8.1/preset?b=1&s=12&t=3&e=0.5&p=2

[DorinDXN]

C1E_02321 is published

Addressed an issue about the Notes content disappearing when loading some presets.

[DorinDXN]

C1E_02320 is published

The info about a preset in Row, Ring or Turn pages are now called "notes" and are always visible under the preset list selector.

[DorinDXN]

C1E_02319 is published

Added [>] button which toggle as [<] in Row and Ring pages.
the [MAP], [Probe], [Template] and [goVM] buttons will produce files according with the symbol,
">" is for clockwise and "<" is for counterclockwise.

[DorinDXN]

Was a typo in description, should be "<" for Left or CCW, I corrected.

[DorinDXN]

C1E_02318 is published

When a preset contains the "<"; symbol in its name, which corresponds to a rotation to Left or counterclockwise,
the [MAP], [Probe], [Template] and [goVM] buttons will produce files according with the counterclockwise rotation.

[DorinDXN]

C1E_02317 is published

Addressed an issue regarding an invalid script causing endless "loading.." of the preset containing that script.

[DorinDXN]

C1E_02315 is published

Removed AF OFF to avoid confusion with MF
For particular applications if is need to have no AF signal at all, nor MF, is possible to use AF 0 sec.

[DorinDXN]

C1E_02314 is published

Addressed an issue regarding comments on M: modifier and Script, the separator is now changed from ; to ~
E.g.
My AEB~B1,0.03,0.06,0.13,0.25,0.50,2,4,8,16,32
My Script~SL,0x10,-44.36x10,44.36x10,Z,NN

[DorinDXN]

C1E_02313 is published

Addressed an issue regarding gesture mode, MECHA was turning back to initial position after rotation.

[DorinDXN]

C1E_02312 is published

Addressed an issue regarding STEP by STEP mode sometimes remains ON after the preset is ended, instead of becoming OFF.