Announcement

Collapse
No announcement yet.

Firmware - current version and changes.

Collapse
This topic is closed.
X
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • C1E_02190 is published

    Addressed an issue regarding [LEFT] button of UI which caused MECHA do not rotate, issue introduced in 2188.
    1. Mecha it possible.
    2. Mecha it easy.
    3. Mecha team up.

    4. ..

    Comment


    • C1E_02191 is published

      Addressed an issue regarding 1313 test and maybe other tests not returning in initial position, issue introduced in 2188.
      1. Mecha it possible.
      2. Mecha it easy.
      3. Mecha team up.

      4. ..

      Comment


      • C1E_02192 is published

        MECHA DAC, Improved digit precision of very small angles for MECHA-V in certain scripts.
        1. Mecha it possible.
        2. Mecha it easy.
        3. Mecha team up.

        4. ..

        Comment


        • C1E_02193 is published

          Addressed an issue regarding the positioning with the slider for small angles, issue introduced in 2188.
          1. Mecha it possible.
          2. Mecha it easy.
          3. Mecha team up.

          4. ..

          Comment


          • C1E_02194 is published

            Addressed an issue regarding the beeps not being produced in certain situations.
            1. Mecha it possible.
            2. Mecha it easy.
            3. Mecha team up.

            4. ..

            Comment


            • C1E_02195 is published

              Addressed an issue regarding N, in MSS scripts resulted two nadirs instead on a single one, and the same for Z,
              1. Mecha it possible.
              2. Mecha it easy.
              3. Mecha team up.

              4. ..

              Comment


              • C1E_02196 is published

                Addressed an issue regarding 31< code not working properly.

                Added 32< code for automatic shooting pattern computed by MECHA, without using the UI,
                Is similar with 31< code but can be used Fish-Eye lenses as well.
                The difference from 31< is that 32< uses for refference a small feature centered in the frame, say, under the central focus point
                After entering the 32< code, MECHA will flash the power button and waits for two quick presses of the power button,
                first is in order to trigger the camera and the second is after the camera was triggered.
                After that, MECHA will rotate slowly to the right and wait another press of power button right after the reference feature is out of the camera's frame.
                Then MECHA will go back in initial position and will start to flash 1, 2 and 3 LEDs
                and waits for one of the buttons [1] [2] or [3] to be pressed to assign the computed preset to that particular button.
                To cancel the assignment, the power button can be pressed instead.

                [Shots] in UI of /row accepts also h and v parameters to indicate a non rectilinear lens is used, e.g.
                8mm h105 v170
                for Sigma 8mm 3.5 on 1.6 crop
                h105 mean horizontal fov and v170 mean vertical fov
                these can be either the usable fov determined after mask cropping in stitching software or taken from reference tables.

                Presets made by command lines also accepts horizontal fov and vertical fov of the lens, if given, like
                192.168.8.1/preset?b=1&f=8&hf=105&vf=170&p=2
                this will set on button 1 (b=1)
                a preset for Sigma 8mm on 1.6 crop giving the 105 horizontal fov (hf=105) and 170 vertical fov (vf=170)
                and optional, a pause of 2 seconds after shoot (p=2)

                All the above will be generated according with the preferred MSS pattern in config.
                If nadir shoot is unwanted and is need for a single Zenith, you can change
                SL,==,ZZ,NN with SL,==,Z
                1. Mecha it possible.
                2. Mecha it easy.
                3. Mecha team up.

                4. ..

                Comment


                • C1E_02197 is published.

                  Addressed an issue regarding gesture mode not working properly in Ring page.
                  1. Mecha it possible.
                  2. Mecha it easy.
                  3. Mecha team up.

                  4. ..

                  Comment


                  • C1E_02198 is published

                    Added some status number at the bottom of the UI,
                    for now, only the number of devices connected to MECHA in AP
                    This should be around [ 0 ], [ 1 ] or [ 2 ] in the case of DAC,
                    if it is higher, for better performance, please consider disconnect from MECHA the unused devices.
                    Also is highly recommended to change the password for SSID in /config
                    in order to prevent other devices to connect by guessing the default password.
                    1. Mecha it possible.
                    2. Mecha it easy.
                    3. Mecha team up.

                    4. ..

                    Comment


                    • C1E_02199 is published

                      Addressed a rare issue when MECHA cannot be accessed at 192.168.8.1, for unknown reasons, despite it is in AP mode.
                      This was reported on only one unit, but reproduced, after intensive tests, in laboratory.
                      1. Mecha it possible.
                      2. Mecha it easy.
                      3. Mecha team up.

                      4. ..

                      Comment

                      Working...
                      X