Announcement

Collapse
No announcement yet.

Firmware - current version and changes.

Collapse
This topic is closed.
X
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • There is a problem at update server, will be fixed ASAP
    1. Mecha it possible.
    2. Mecha it easy.
    3. Mecha team up.

    4. ..

    Comment


    • Fixed, it is all good now.
      1. Mecha it possible.
      2. Mecha it easy.
      3. Mecha team up.

      4. ..

      Comment


      • C1E_02208 is published

        Added /connect page in UI, it allows connection of MECHA to a wireless network in an easier way, by listing the available networks.
        The network which has connected successfully last time will be on gray background, that one can be connected by using the stored password instead of typing it.
        This page will be enhanced in future FW updates ( e.g. [Update] button will be added soon)

        In UI [IMG] is changed in [TRG] - from trigger - to be more precise what MECHA does and how the number of resulting images could differ from triggers when in camera bracketing is used.
        MF will send now also the AF signal required for Sony cameras, if is need for no AF signal at all, please select the newly added AF OFF, in AF selection, in UI.
        1. Mecha it possible.
        2. Mecha it easy.
        3. Mecha team up.

        4. ..

        Comment


        • C1E_02210 is published

          This is Beta.
          Introducing support for stitchless panoramas and tours for Fanotec products.
          More upcoming info at the link below
          https://forum.nodalninja.com/forum/p...tics/33391-stc
          1. Mecha it possible.
          2. Mecha it easy.
          3. Mecha team up.

          4. ..

          Comment


          • C1E_02211 is published

            STC, addressed an issue causing the initial opening view to not work if was a positive value e.g. h[1]=6; but worked fine for negative values e.g. h[1]=-6;
            1. Mecha it possible.
            2. Mecha it easy.
            3. Mecha team up.

            4. ..

            Comment


            • C1E_02212 is published

              Addressed an issue regarding the [Shoot] button on NN IR remote and on C2 controller, were not triggering the camera after an emergency stop or when in/after pause from script or if paused by IR remote.
              1. Mecha it possible.
              2. Mecha it easy.
              3. Mecha team up.

              4. ..

              Comment


              • C1E_02218 is published
                Please use this thread for feeback
                https://forum.nodalninja.com/forum/p...r-confirmation

                This is beta: Added in /config "[x] Enable Fast Shutter Confirmation."
                If is enabled, MECHA will wait indefinitely, for each trigger, until the shutter confirmation comes through AUX port via a PC Sync cable.
                For now, in case of DAC, this should be enabled in /config of the controller the AUX port has the PC Sync cable connected to.
                This should help when the shutter open time is not known, like AEB.
                Please test it and send feedback via forum or e-mail support.
                Is an extension of the old shutter confirmation, which, reportedly, didn't work well for very short exposure times.
                1. Mecha it possible.
                2. Mecha it easy.
                3. Mecha team up.

                4. ..

                Comment


                • C1E_02220 is published

                  Added support for automatic detection of Rotator Type
                  If Rotator Type is detected by MECHA to be different from the one set in /config,
                  it will use the parameters for the detected one instead.
                  1. Mecha it possible.
                  2. Mecha it easy.
                  3. Mecha team up.

                  4. ..

                  Comment


                  • C1E_02221 is published

                    The Automatic Detection of Rotator Type is retrograded as beta, and will detect only if the rotator type is set on "AUTO"
                    until we're sure all the rotators out there presents properly.
                    1. Mecha it possible.
                    2. Mecha it easy.
                    3. Mecha team up.

                    4. ..

                    Comment


                    • C1E_02222 is published

                      Addressed an issue regarding auto detection of some rotators
                      C2 - Addressed issues regarding swapping of cables being not fully propagated in various procedures.
                      1. Mecha it possible.
                      2. Mecha it easy.
                      3. Mecha team up.

                      4. ..

                      Comment

                      Working...
                      X