Announcement

Collapse
No announcement yet.

Using Two MECHAs Wireless Connected

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • It is published, basically you can use now

    T10^0.05,300^0

    or

    Z1^z,10^0.05,300^z

    it will be improved further, I'll add the possibility for values as delays and sync. with a master clock, in future.


    ----------------------------------8<-----------------------------------------------

    C1E_02035

    For MECHA DAC, Added the possibility "T" to specify the movement in angles for a time-lapse when booth MECHAs needs to move
    Is the same as "Z" pattern, except the intervals will be more equals as even the zero movements are executed by V MECHA.
    "Z" can be used for time lapse as well and if zero movements needs to be executed by V MECHA, ^z or ^Z can be used instead of ^0. e.g.
    Z1^z,10^0.5,300^z is the same as
    Z1^0,10^0.5,300^0 except the zero movements will be executed
    When "T" is used any zero movement is executed, so is no need for ^z nor ^Z
    T1^0,10^0.5,300^0
    will have all zero moves executed by V MECHA thus the shots being more equally distributed in time.

    ----------------------------------8<-----------------------------------------------
    1. Mecha it possible.
    2. Mecha it easy.
    3. Mecha team up.

    4. ..

    Comment


    • Thanks Dorin.

      Comment


      • For users of MECHA DAC is even more highly recommended to update to C1E_02037,
        as it addresses an issue regarding [ x RIGHT ] and [ x LEFT ] commands.
        The advanced use of Z and T patterns can lead to more use of these commands.


        ---------8<-------------------------------------------------

        C1E_02037
        Addressed an issue regarding [x 1] , number of moves, while saved and executed correctly, the setting is not loaded in UI from users presets.
        It is a highly recommended update as the issue is there from the beginning of loading the user presets (other than for the [1].. [3] buttons), however is affecting only the [X RIGHT] and [X LEFT] commands.

        ---------8<-------------------------------------------------
        1. Mecha it possible.
        2. Mecha it easy.
        3. Mecha team up.

        4. ..

        Comment


        • Could be of interest.
          https://forum.nodalninja.com/forum/p...sets#post31087
          1. Mecha it possible.
          2. Mecha it easy.
          3. Mecha team up.

          4. ..

          Comment


          • Hi Dorin,
            I have a question. Is "3212312 <" no longer valid?

            Shigeru

            Comment


            • Hi Shigeru

              It is valid.

              1. Mecha it possible.
              2. Mecha it easy.
              3. Mecha team up.

              4. ..

              Comment


              • I'm checking if could be improved the performance there,
                I'll let you know to test it, to see if there are any issues.
                1. Mecha it possible.
                2. Mecha it easy.
                3. Mecha team up.

                4. ..

                Comment


                • Hi Shigeru,

                  Please try to update to C1E_02059 , using 3212312< then test the code for re-update which is 31212<

                  Will be today another update and you'll be able to test 3212312< today as well with the new improvements.

                  ------------------------------------------------8<--------------------------------------------

                  C1E_02059

                  MECHA DAC Improvements and increased stability for FW update both at once using code 3212312<
                  This will be in effect at the next update from C1E_02059, of course.

                  ------------------------------------------------8<--------------------------------------------
                  1. Mecha it possible.
                  2. Mecha it easy.
                  3. Mecha team up.

                  4. ..

                  Comment


                  • Originally posted by DorinDXN View Post

                    Please try to update to C1E_02059 , using 3212312< then test the code for re-update which is 31212<

                    Will be today another update and you'll be able to test 3212312< today as well with the new improvements.
                    using 3212312< MECHA-H123 gives a series of LED flashes that looks like downloading. However, firmware is same at 02055 for mine.
                    using 31212< is same result.
                    Fanotec
                    We listen. We try harder.

                    Comment


                    • Please try to update to C1E_02059 in single way, then test 31212<

                      Thank you.
                      1. Mecha it possible.
                      2. Mecha it easy.
                      3. Mecha team up.

                      4. ..

                      Comment


                      • Originally posted by DorinDXN View Post
                        Please try to update to C1E_02059 in single way, then test 31212<

                        Thank you.
                        31212< H MECHA reupdate. V MECHA no update LED signal.
                        Fanotec
                        We listen. We try harder.

                        Comment


                        • Will be the C1E_02060 FW update today and 31212< and 3212312< will work flawlessly.

                          Thank you.
                          1. Mecha it possible.
                          2. Mecha it easy.
                          3. Mecha team up.

                          4. ..

                          Comment


                          • Both code, for update 3212312< and reupdate 31212< should be more stable now, tested more that 1 day, various routers and fast/slow Internet connections

                            Please update in a way or another both units to C1E_02060 then try the 31212< on H MECHA when units are paired.
                            It will be nice to have some total time as feedback
                            from the pressing of the [<] until - and = shown back on MECHAs

                            is 2:40 in my case

                            Thanks!

                            ----------------8<-----------------------------------

                            C1E_02060

                            MECHA DAC Improvements and increased stability for FW update both at once
                            from MECHA H from UI or using the code 3212312<
                            Provided the naming pattern starts with MECHA-H and MECHA-V and the units are paired, when updating MECHA H from UI or via 312312< 31212< codes, the update will assure both units to have the same FW regardless if one or the other were updated individually. The update time was reduced from 4 minutes to 2:40, it might vary, depending on internet connection.
                            This will be in effect at the next update if both units have at least C1E_02060.

                            ----------------8<-----------------------------------
                            1. Mecha it possible.
                            2. Mecha it easy.
                            3. Mecha team up.

                            4. ..

                            Comment


                            • Hi Dorin,

                              Thank you for your support!

                              I executed the "3212312 <" command with firmware version 02059. This time, two MECHA's have been updated at the same time, but even after the MECHA-H has been updated and restarted, MECHA-V continues to download endlessly. The two MECHA's have already been disconnected, but the MECHA-V firmware update is not over.

                              What can I do?
                              Last edited by Shigeru; 2 weeks ago.

                              Comment


                              • What FW is on H MECHA and V MECHA now?
                                1. Mecha it possible.
                                2. Mecha it easy.
                                3. Mecha team up.

                                4. ..

                                Comment

                                Working...
                                X