Request of MECHA Presets

[DorinDXN]

Until the wizard is ready, If you need for some particular presets for MECHA, please ask here.
I'll try to make them available ASAP.

For presets made from a PTGui file
kindly refer to
https://forum.nodalninja.com/forum/p...-mecha-presets

Dorin

[MattRoss]

DAC_35MM_on_FF_14-8-Z-N-01

This is provided MECHA has connection to Internet.
Please refresh the UI page if you don't see it.

it will take
- three rows of 14 shots 0,-30,+30
- two rows of 8 at +65 and -65
- one Zenith and one Nadir

could you modify this Preset to have the three rows of 0,-30,+30 be setup in the Z pattern

Thanks Matt

[DorinDXN]

Not sure I understand, please give some more details, how the shooting scenario is supposed to happen?

I'll be happy to modify, once I have a better understanding of the request.

[MattRoss]

Not sure I understand, please give some more details, how the shooting scenario is supposed to happen?

I'll be happy to modify, once I have a better understanding of the request.

The three rows of 14 shots 0,-30,+30 if it could be +30,0,-30 1st Rotation -30,0,+30 2nd Rotation etc ....
I want to be able create a giga pano from the Three row images reusing the same images

Just shot a 360 with your preset 300 images . . . Awesomeness !!!! now to processing I Go

[DorinDXN]

I'll made a sample preset tomorrow and post it here, then you can test and modify as you wish.

[DorinDXN]

Here is the an archive
presets_003.zip
zip password: Mecha

with these presets
'DAC 35MM on FF 15-8-Z-N Sphere'
complete sphere 15 around + 8 around + Zenith + Nadir
'DAC 35MM on FF 15-8-Z-N Top Bottom'
only upper and lower parts, two rows 8 around + Zenith + Nadir
'DAC 35MM on FF 15-8-Z-N Middle'
only the three middle rows, 15 around

these requires C1E_02041 or newer
'DAC 35MM on FF 15-8-Z-N Infinite x 65 + 45 S'
first shoots the upper and lower then repeats the middle rows until shots ends.

'DAC 35MM on FF 15-8-Z-N Infinite x 65 + 45 S Paused'
first shoots the upper and lower then pauses and repeats the middle rows until shots ends, after click on [PAUSE]


all_presets_DAC_35MM_on_FF_15-8-N-Z-02.mps
need to be imported in MECHA via click on [ Import ] under preset list


The wizard will make this more easy,
Note
the first 3 can be launched by either [ RIGHT ] or [ NN X RIGHT ] or [ LEFT ] or [ NN X LEFT ]

The infinite variants means the number of shots can be increased by 45 like 65, 110, 155, 200, 245.. so on
by clicking at [ x 65 ] then [ custom ]
ATM, the infinite variants need to be launched by click on [ NN x RIGHT ] or [ NN X LEFT],

-----------------------8<---------------------------------------

C1E_02041

For MECHA DAC. Enhanced "Z" and "T" possibilities even more to support panorama made from virtually infinite number of shots.

-----------------------8<---------------------------------------

[Venti]

How can I download a zip file?

[DorinDXN]

Please try again, looks like some forum issue prevent it from downloading.

Should work by clicking on archive or in the attachment area.

[DorinDXN]

'DAC 35MM on FF 15-8-Z-N Sphere'
complete sphere 15 around + 8 around + Zenith + Nadir
'DAC 35MM on FF 15-8-Z-N Top Bottom'
only upper and lower parts, two rows 8 around + Zenith + Nadir
'DAC 35MM on FF 15-8-Z-N Middle'
only the three middle rows, 15 around

are also available now via [More from Server..]

[DorinDXN]

These also are available now via [More from Server..]
These requires FW C1E_02042 otherwise the UI will become wider than screen on phones.

'DAC 35MM on FF 15-8-Z-N Infinite x 65 + 45 S'
first shoots the upper and lower then repeats the middle rows until shots ends.

'DAC 35MM on FF 15-8-Z-N Infinite x 65 + 45 S Paused'
first shoots the upper and lower then pauses and repeats the middle rows until shots ends, after click on [PAUSE]

The infinite variants means the number of shots can be increased by 45 like 65, 110, 155, 200, 245.. so on
by clicking at [ x 65 ] then [ custom ]
ATM, the infinite variants need to be launched by click on [ NN x RIGHT ] or [ NN X LEFT],

[DorinDXN]

Starting with FW update C1E_02034,

become much easier for both :
1) To provide MECHA presets for various patterns.
2) To modify the provided preset for some variations from it

[MattRoss]

Dorin, I have been using the DAC_35MM_on_FF_14-8-Z-N-01 with great success and I was wondering if you could create a preset for the FF at 16mm.

Thank you Matt

[DorinDXN]

Added on [More from Server..]

DAC_16MM_on_FF_8-6-01
and
DAC_16MM_on_FF_8-5-Z-N-01

[MattRoss]

Added on [More from Server..]

DAC_16MM_on_FF_8-6-01
and
DAC_16MM_on_FF_8-5-Z-N-01

Thank will use them today

[stalwart]

Hi all. I would appreciate it if someone could code a preset based on this PTS file: https://www.360imagery.co.uk/temp/3_rows_8_Z_D.pts
It's 3 rows of 8 images (0 / +50 / -50) with 2 x zeniths from 0 & 180 and 2 x nadirs from 0 & 180. (make sense?)