Announcement

Collapse
No announcement yet.

Server Presets Described.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • DorinDXN
    replied
    DAC_14-10-8-6_Shots_7_Rows_2N_2Z_Level.mps

    This is a bit intimidating but it works very well, for a pre-scripting era,
    why not use it? even though it may look a bit UFO Science

    Click image for larger version  Name:	DAC_14_shots_around_1.png Views:	0 Size:	51.3 KB ID:	32644

    it is very similar with the previous one except it shoots a different number of positions per each row,

    it shoots 14 positions on 1st row,
    then 10 position at -12 tilt,
    then 8 positions at - 45 tilt
    then 6 position at -60 tilt
    then 10 position at 12 tilt,
    then 8 positions at 45 tilt
    then 6 position at 60 tilt
    then 2 Zeniths each at 90 deg apart
    then 2 Nadirs each at 90 deg apart

    Here is the science
    P10:-12,8:-45,6:-60,10:12,8:45,6:60,2^90:90,2^90:-90,0

    after first row of 14 is made just like for a single MECHA
    the repeat is called and the list says what changes are for each repeat
    10:-12, for 1st repeat says is 10 positions from now on (2nd MECHA will tilt to -12 deg.)
    8:-45, for 2nd repeat says is 8 positions from now on (2nd MECHA will tilt to -45 deg.)
    6:-60, for 3rd repeat says is 6 positions from now on (2nd MECHA will tilt to -60 deg.)
    10:12, then is 10 positions from now on (2nd MECHA will tilt to 12 deg.)
    8:45, then is 8 positions from now on (2nd MECHA will tilt to 45 deg.)
    6:60, then is 6 positions from now on (2nd MECHA will tilt to 60 deg.)
    now something different,
    instead of telling
    2:90,
    which will say two positions at 90 tilt (which will turn to be at 180° apart which could be good as well)
    we say
    2^90:90,
    which will say two positions at 90° apart for the 90° tilt for i.e. two Nadirs at 90 apart
    then the same for two Zeniths.
    2^90:-90,
    then go back to 0 tilt

    Changes can be made to this presets as well,

    if you want more rows you need to change the numbers of repeats as well by click on Repeat and
    enter, at custom, 10*1 instead of 8*1 if two more rows are added, say we want another two rows
    at -70 made of 4 positions each

    P10:-12,8:-45,6:-60,4:-70,10:12,8:45,6:60,4:70,2^90:90,2^90:-90,0
    If we want the order of rows to be changed their position in the list of angles can be adjusted,
    e.g. with positive the tilts first
    P10:12,8:45,6:60,4:70,10:-12,8:-45,6:-60,4:-70,2^90:-90,2^90:90,0
    again, the repeat must be set at [Repeat 10*1 sec]
    if for some reasons want more seconds between rows it can be sat at [Repeat 10*5], say for 5 seconds.

    also the number of positions can be changed as well, say
    P12:12,10:45,8:60,6:70,12:-12,10:-45,8:-60,6:-70,2^90:-90,2^90:90,0



    then you can click on [Save 1] to save this preset to button 1 of MECHA-H-DAC
    then you can launch this preset by simply press [1] then [>] (for clockwise rotation)
    when MECHA is idle or press [1] then [<] (for counter-clockwise rotation)

    Also you can click on [Save] to save it on MECHA in the preset list with a desired name.

    Leave a comment:


  • DorinDXN
    replied
    DAC_10_Shots_3_Rows_Z_N_Level.mps

    the description is close enough for
    DAC_8_Shots_3_Rows_Z_N_Level.mps
    DAC_12_Shots_3_Rows_Z_N_Level.mps
    as well

    Click image for larger version  Name:	DAC_10_shots_around_1.png Views:	0 Size:	51.2 KB ID:	32640

    Suitable for multi-row panorama, 10 around, for MECHA DAC,

    Used in A1-A3 mode
    In [A ] levels the presets needs to be selected then click on [Load] to be loaded, or it can be deleted if you want to,
    or other operations performed as well, still some are possible only after the preset is saved with [Save] after [Load]

    MECHA needs to be in Level starting position
    It will shoot three rows of 10 positions each
    one at 0 deg of tilt,
    one at 45 deg. of tilt
    one at -45 deg, of tilt
    one Zenith
    one Nadir

    to change it from 10 positions each to 12 position each is only need to change
    from [10 Shots] to [12 Shots]

    to change the degrees of tilt for row, say, from 45 deg. to 30 deg.is need to click on
    [P-45,45,1:90,-90,0°]

    Then click on [Dual]

    Click image for larger version  Name:	DAC_10_shots_around_2.png Views:	1 Size:	41.8 KB ID:	32642


    click [Ok] for letting the ip of 2nd MECHA unchanged,
    then edit the list of angles in


    Click image for larger version  Name:	DAC_10_shots_around_3.png Views:	0 Size:	53.7 KB ID:	32641


    P-30,30,1:90,-90,0
    then [Ok]
    ​​​​​
    ------8<-------------------

    This preset use the repeat feature offered by MECHA before the scripting features were added.
    the list of angles explained
    P is a convention in which tilting is like pitch in PTgui
    after first row of 10 or 12 is made just like for a single MECHA
    the repeat is called and the list says what changes are for each repeat
    for 1st repeat is -35 (2nd MECHA will tilt to -35 deg.)
    for 2nd repeat is is 35 (2nd MECHA will tilt to 35 deg.)
    then something different
    1:
    which says from now on is only one position per row,
    1:90, says 1 position at 90 tilt,
    -90, then at -90 tilt,
    then go back to 0 tilt

    ------8<-------------------


    then you can click on [Save 1] to save this preset to button 1 of MECHA-H-DAC
    then you can launch this preset by simply press [1] then [>] (for clockwise rotation)
    when MECHA is idle or press [1] then [<] (for counter-clockwise rotation)

    Also you can click on [Save] to save it on MECHA in the preset list with a desired name.

    Leave a comment:


  • DorinDXN
    replied
    6_Shots_Around.mps

    the description is close enough for
    4_Shots_Around.mps
    8_Shots_Around.mps
    10_Shots_Around.mps
    12_Shots_Around.mps
    as well

    Click image for larger version  Name:	6_shots_around_1.png Views:	0 Size:	29.5 KB ID:	32637
    Suitable for single row panorama, 6 around,

    Can be used in the S1 (Simple 1) display level,
    in S1 level is only need to select the preset
    6_Shots_Around.mps
    from list and will be automatically loaded
    if you want to change from 6 around to 4 around,
    is only need to click on [6 Shots] then select [4 Shots].
    to launch the preset click on either [RIGHT] or [LEFT]

    If you want info about buttons in UI, please click on [info]

    If you want to change some advanced setting of the preset you can switch to A1 (Advanced 1) display level
    where you can change, say, the speed from 6 RPM to 9 RPM

    Click image for larger version  Name:	6_shots_around_2.png Views:	0 Size:	47.4 KB ID:	32638


    Also here you can click on [Save 1] to save this preset to button 1 of MECHA
    then you can launch this preset by simply press [1] then [>] (for clockwise rotation)
    when MECHA is idle, or press [1] then [<] (for counter-clockwise rotation)

    Also you can click on [Save] to save it on MECHA in the preset list with a desired name.

    Leave a comment:


  • DorinDXN
    replied
    Before you running any presets,
    if you have E2 or P1 rotator
    please set in
    192.168.8.1/config
    of any MECHA you have

    Click image for larger version  Name:	e2_as_vertical.png Views:	0 Size:	27.0 KB ID:	32635
    then [Apply]
    this needs o be done once, and mostly is done at factory, but do no harm to check, at least.


    The conventions for starting and ending positions, if specified in the preset name, are:
    Click image for larger version  Name:	MECHA DAC poses_small.jpg Views:	0 Size:	33.5 KB ID:	32634
    With FW C1E_02097 or newer,
    you can turn from Level to Parked and back by pressing
    [>] then press quick [2]
    or
    [<] then press quick [2]
    of MECHA-V

    you can also use MECHA-H buttons as well for rotating by intervals,

    [>] [1] 45°
    [>] [2] 90°
    [>] [3] 180°
    the same intervals for [<] but in the opposite direction
    these intervals can be changed in /config if needed

    so on MECHA-V [>][3] or [<][3] can be used to rotate from Raised to Parked and back.


    row;DAC_TEST_1312_Parked.mps
    row;DAC_TEST_1313_Level.mps
    row;DAC_TEST_1321_Raised.mps

    these are the DAC tests
    also featured in this video

    Leave a comment:


  • DorinDXN
    started a topic Server Presets Described.

    Server Presets Described.

    To avoid accidents caused by misuse of Server Presets
    available via
    More from Server in presets list
    only 12 presets are available for now,

    ring-row;4_Shots_Around.mps
    ring-row;6_Shots_Around.mps
    row;8_Shots_Around.mps
    row;10_Shots_Around.mps
    row;12_Shots_Around.mps
    row;DAC_8_Shots_3_Rows_Z_N_Level.mps
    row;DAC_10_Shots_3_Rows_Z_N_Level.mps
    row;DAC_12_Shots_3_Rows_Z_N_Level.mps
    row;DAC_14-10-8-6_Shots_7_Rows_2N_2Z_Level.mps
    row;DAC_TEST_1312_Parked.mps
    row;DAC_TEST_1313_Level.mps
    row;DAC_TEST_1321_Raised.mps

    All the presets will be added back, one by one, with proper description and instructions,
    where to change something in each one.

    Also the above ones will be explained.

    The priority will be for the presets with less complexity or more wide use, however, if you miss one particular preset or you requested that preset and didn't downloaded or saved before of simply you want one preset which is not available now,
    please ask and that can be either elevate to higher priority or made available through PM

    Further more some changes will be made in UI to display that description of the preset after download and before use.
Working...
X