Announcement

Collapse
No announcement yet.

How to run default preset from buttons?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • How to run default preset from buttons?

    The UI shows a 'button 0' preset, which is loaded by default at power up. However I cannot see how to execute this preset from the controller buttons. Is that possible?

  • #2
    with [0] + [>] it will not work as
    [0] + [>] is the zLM preset, which works like this, someone is calling, "I want MECHA to do this", then I say OK, set some stuff in server the, tell "press [0] then [>]" and MECHA does that (of course requires MECHA to be connected to Internet)

    You can assign three presets to each button [1], [2], [3]
    To launch other presets from buttons you can do as described here
    for C1 (DAC)
    https://www.nodalninja.com/Manuals/mecha.pdf#page=83
    in short you can save that preset with name

    012 Preset's name

    then press
    0 wait a bit for LEDs to flash ":" then [1][2]> and that preset is launched

    or similar

    013 Other Preset's name
    then press
    0 wait a bit for LEDs to flash ":" then [1][3]> and that preset is launched

    so on,

    you can also use FavCode1, or FavCode2, or FavCode3 set in /config

    like FavCode1 set as 012
    then when MECHA is idle if you press long [1] MECHA, will launch the preset 012


    for C2, the method from C1 works as well, but is on my todo list to add presets to be launched from C2 menu (on OLED)
    I was about to publish it but the new 2 axis UI took priority,
    as lots of people wish a simple UI for MECHAs and expressed that in the latest feedback for STC
    so the next will be the new very simple UI for MECHA,
    don't worry, the older one will still work, the new UIi will be a new page, one will choose whichever wants.


    1. Mecha it possible.
    2. Mecha it easy.
    3. Mecha team up.

    4. ..

    Comment

    Working...
    X