Announcement

Collapse
No announcement yet.

How to run a user preset from aux port pulses?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • How to run a user preset from aux port pulses?

    Having stored a scripted preset, I would like to be able to connect it to a pattern of aux port pulses. Is there a way to do this?

  • #2
    Was described in the history log, at the time was published,
    IIRC you used custom protocol on AUX port before,
    see if it helps

    -----8<----------------------------------

    C1E_02142
    Some changes regarding the custom protocol on AUX port
    45.0=1A, rotates at 45.0 degrees from Home position, absolute.
    -45.0=1A, rotates at -45.0 degrees from Home position, absolute.
    ^45.0=1A, rotates with 45.0 degrees from previous position, incremental.
    ^-45.0=1A, rotates with -45.0 degrees from previous position, incremental.

    C1E_02141
    Enhanced the possibilities when use the custom protocol on AUX port.
    With common remotes, a half-press is detected as 1A, a full press is detected as 1A1S,
    These are the possibilities now, e.g. for a half-press:
    045=1A, execute the a preset which starts with 045+blank in name.
    -045=1A, execute the a preset which starts with 045+blank in name but, in the opposite sense of rotation.
    HS=1A, Home Set for the follow, also a Home Set can be done by pressing the power button.
    45.0=1A, rotates with 45.0 degrees.
    -45.0=1A, rotates with -45.0 degrees.
    the above uses the inverse rotation for buttons, if is set.
    H=1A, return to Home position set by HS or by the power button.

    -----8<----------------------------------

    1. Mecha it possible.
    2. Mecha it easy.
    3. Mecha team up.

    4. ..

    Comment

    Working...
    X