Announcement

Collapse
No announcement yet.

C2 - Firmware - current version and changes.

Collapse
This topic is closed.
X
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #46
    C2E_12284 is published

    Addressed an issue regarding partial panorama defined by corners in case of start position other than Level.

    In presets set on OLED Menu, added the possibility to specify camera orientation and custom overlap (OverlapW) on width.
    When main Overlap is adjusted also the OverlapW will be set at the same value, then after, edit only if needs to be different than the main Overlap.
    1. Mecha it possible.
    2. Mecha it easy.
    3. Mecha team up.

    4. ..

    Comment


    • #47
      C2E_12285 is published

      Addressed an issue affecting after auto-leveling, when launching a preset, MECHA rotated unnecessary in Parked position.
      Addressed an issue regarding "SHOOT" not being shown on OLED when triggering the camera if AF is set to OFF.
      When mirror lock-up is set, i.e. B<0, the OLED will show from now "MLU" instead of "SHOOT" for the MLU triggering command.
      1. Mecha it possible.
      2. Mecha it easy.
      3. Mecha team up.

      4. ..

      Comment


      • #48
        C2E_12286 is published

        Fast Shutter Confirmation is automatically used if E:SHT C. or E:SHT C1 is set in preset.
        Therefore, the [x] Enable Fast Shutter Confirmation entry from /config is removed.
        1. Mecha it possible.
        2. Mecha it easy.
        3. Mecha team up.

        4. ..

        Comment


        • #49
          C2E_12287 is published

          Addressed an issue regarding Shutter Confirmation not working in some cases.
          Added Shutter CONF. TEST in OLED Menu [C 64]
          After launched, the test MECHA will count the shutter detection from camera, via AUX port, camera needs to be triggered manually, by camera's trigger button or a camera remote.
          After 10 seconds of idle, the number of SHT detection will be shown.
          1. Mecha it possible.
          2. Mecha it easy.
          3. Mecha team up.

          4. ..

          Comment


          • #50
            C2E_12288 is published

            Optimizations of Shutter Confirmation feature.
            The Shutter Confirmation now works via other MECHA also for C2+, when camera and PC-Sync cable is connected to another C1/C2 mounted on hot shoe.
            1. Mecha it possible.
            2. Mecha it easy.
            3. Mecha team up.

            4. ..

            Comment


            • #51
              C2E_12289 is published

              Added in /config
              [x] Use New Shutter Confirmation (enabled by default)
              it will be used in both shutter confirmation and test of shutter confirmation.
              If the test fails, please try with this option disabled as well.
              Use E:SHT C1 or E:SHT C. only if the test has success,
              otherwise use the Button Confirmation instead, like E:BTN > C. or E:BTN > CT
              1. Mecha it possible.
              2. Mecha it easy.
              3. Mecha team up.

              4. ..

              Comment


              • #52
                C2E_12290 is published

                Increased the responsiveness of the buttons when in OLED Menu.
                1. Mecha it possible.
                2. Mecha it easy.
                3. Mecha team up.

                4. ..

                Comment


                • #53

                  MECHA C2 User's Guide - Updated to V 0.2.8 - July 26, 2021
                  https://www.nodalninja.com/Manuals/c2-guide.pdf
                  1. Mecha it possible.
                  2. Mecha it easy.
                  3. Mecha team up.

                  4. ..

                  Comment


                  • #54
                    C2E_12291 is published

                    Addressed an issue regarding the partial panorama set by corners if the upper rail is Parked or Raised and the preset was for Level, the adjusting for level ended up in an unwanted vertical offset.
                    After this fix, the correct procedure is to adjust the upper rail in expected position (Level/Parked/Raised) then to set the corners.
                    1. Mecha it possible.
                    2. Mecha it easy.
                    3. Mecha team up.

                    4. ..

                    Comment


                    • #55
                      C2E_12293 is published

                      Optimization of shutter confirmation for short exposures for Canon 5DII and other cameras.
                      1. Mecha it possible.
                      2. Mecha it easy.
                      3. Mecha team up.

                      4. ..

                      Comment


                      • #56
                        C2E_12294 is published

                        The order of the rows and the completion with Nadirs and Zeniths
                        can be have now only one or two rows instead of MDU e.g. can be set like DU or M only.
                        You can use MAP button of UI to preview the rows in PTGui, if necessary.
                        1. Mecha it possible.
                        2. Mecha it easy.
                        3. Mecha team up.

                        4. ..

                        Comment


                        • #57
                          C2E_12295 is published

                          Addressed an issue regarding the partial panorama cannot be set by corners in Advanced Mode.
                          1. Mecha it possible.
                          2. Mecha it easy.
                          3. Mecha team up.

                          4. ..

                          Comment


                          • #58
                            C2E_12296 is published

                            Addressed an issue regarding the partial panorama set by corners to take in account also the horizontal FOV of lens.
                            Addressed some issues regarding the factory reset and config reset codes.
                            1. Mecha it possible.
                            2. Mecha it easy.
                            3. Mecha team up.

                            4. ..

                            Comment


                            • #59
                              C2E_12297 is published

                              Addressed an issue regarding the partial panorama set by corners affected the script produced in UI after panorama execution.
                              Addressed issues regarding [<] and [>] when running a preset didn't triggered pause and step-by-step switching, sometimes.
                              Added CONNECT TO Wi-Fi in OLED Menu C-42, MECHA will try to connect to the last Wi-Fi.
                              Firmware version at OLED Menu C-82 will display now the FW version for all MCU's and connected rotators as well.
                              1. Mecha it possible.
                              2. Mecha it easy.
                              3. Mecha team up.

                              4. ..

                              Comment


                              • #60
                                C2E_12298 is published

                                addressed an issue regarding button [≡] interpreted as cancel after launch as quick interval 3, resulting MECHA to revert to initial position.
                                1. Mecha it possible.
                                2. Mecha it easy.
                                3. Mecha team up.

                                4. ..

                                Comment

                                Working...
                                X