Announcement

Collapse
No announcement yet.

C2 - Firmware - current version and changes.

Collapse
This topic is closed.
X
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #61
    C2E_12299 is published

    Increased the upper limit for focal length, in C2 OLED Menu, to 950mm
    1. Mecha it possible.
    2. Mecha it easy.

    MECHA Support mecha(at)nodalninja.com

    Comment


    • #62
      C2E_12300 is published

      Added in /config Shutter Confirmation Time Out (sec.) : 30, which is the maximum time MECHA waits for the shutter confirmation to occur.
      1. Mecha it possible.
      2. Mecha it easy.

      MECHA Support mecha(at)nodalninja.com

      Comment


      • #63
        C2E_12301 is published

        Addressed an issue regarding SHT C or SHT C1, if set, failed to trigger the Shutter signal after a cold start of MECHA.
        1. Mecha it possible.
        2. Mecha it easy.

        MECHA Support mecha(at)nodalninja.com

        Comment


        • #64
          C2E_12302 is published

          Addressed an issue regarding BTN > CT causing MECHA to freeze sometimes.
          1. Mecha it possible.
          2. Mecha it easy.

          MECHA Support mecha(at)nodalninja.com

          Comment


          • #65
            C2E_12309 is published

            Added in /config
            [x] Hide some controls in web UI when a motor is running.
            Enabled by default.
            1. Mecha it possible.
            2. Mecha it easy.

            MECHA Support mecha(at)nodalninja.com

            Comment


            • #66
              C2E_12310 is published

              Addressed an issue regarding the moves with buttons from C2 web interface.
              1. Mecha it possible.
              2. Mecha it easy.

              MECHA Support mecha(at)nodalninja.com

              Comment


              • #67
                C2E_12311 is published

                Small optimizations.
                1. Mecha it possible.
                2. Mecha it easy.

                MECHA Support mecha(at)nodalninja.com

                Comment


                • #68
                  C2E_12312 is published

                  Addressed an issue regarding STEP by STEP mode sometimes remains ON after the preset is ended, instead of becoming OFF.
                  1. Mecha it possible.
                  2. Mecha it easy.

                  MECHA Support mecha(at)nodalninja.com

                  Comment


                  • #69
                    C2E_12313 is published

                    Addressed an issue regarding gesture mode, MECHA was turning back to initial position after rotation.
                    1. Mecha it possible.
                    2. Mecha it easy.

                    MECHA Support mecha(at)nodalninja.com

                    Comment


                    • #70
                      C2E_12314 is published

                      Addressed an issue regarding comments on M: modifier and Script, the separator is now changed from ; to ~
                      E.g.
                      My AEB~B1,0.03,0.06,0.13,0.25,0.50,2,4,8,16,32
                      My Script~SL,0x10,-44.36x10,44.36x10,Z,NN
                      1. Mecha it possible.
                      2. Mecha it easy.

                      MECHA Support mecha(at)nodalninja.com

                      Comment

                      Working...
                      X